JOB REQUIREMENTS: Straightening Operation: Carry the casting from the material load, and place into a fixture, or directly onto the steel bench. Use a leather mallet or hand hammer to strike the casting with as much force and number of blows necessary to \"straighten\" the casting within acceptable tolerances, as is determined by its fit within the fixture or other gauging. (For large, heavy castings with thick walls these are \"straightened\" by use of a sledge hammer.) Once a casting is finished, unload from the fixture or bench top, and set aside to the finished load with dividers required by work instructions between layer. Heat Treat Operation: Unload casting and remove divider from casting load. Load and position the castings onto heat treat rack or in heat treat basket as outlined in work instructions. Place an expanded metal divider between layers. Verify correct test bars are placed in each heat treat load. Load full racks/baskets into the heat treat oven and quench tanks with forklift and/or overhead hoist. Verify times per part specific work instructions. Verify oven temperatures for solution. Verify oven temperatures for aging. After completion of the heat treatment and aging cycles- unload the castings heat treat rack or basket and set aside to the finished load with dividers between layers ***** OTHER EXPERIENCE AND QUALIFICATIONS: At least one year of experience in a manufacturing setting is preferred. ***** APPLICATION INSTRUCTIONS: Mail a Rsum: Human Resources Eck Industries, Inc. 1602 N 8th St Manitowoc, WI 54220 Apply In Person: Eck Industries, Inc. 1602 N 8th St Manitowoc, WI 54220 E-Mail a Rsum: HR@eckindustries.com Apply Online: www.eckindustries.com Fax a Rsum: 920.482.5097 Call For Appointment: 920.901.2464 E-Mail a Work Application: hr@eckindustries.com Qualified females, minorities, and special disabled veterans and other veterans are encouraged to apply.